KEMSOL ARCTEC Shower and Tile Cleaner

A heavy-duty cleaning and sanitizing detergent specifically designed for the removal of calcium and lime deposits. It is suitable for hard surfaces such as acrylic, ceramic, fiberglass, chrome, and stainless steel. This cleaner effectively cleans in hard water areas and is safe to use on shower screens, tiles, taps, and toilets.

DIRECTIONS:

• Use undiluted. Spray or apply directly onto the affected surfaces.
• Allow the cleaner to sit for 5-10 minutes to penetrate and dissolve the deposits.
• Scrub the surface if necessary, especially for extra heavy soiling.
• Rinse thoroughly with fresh water after cleaning.
• Use a non-scratching cleaning pad if needed to assist in breaking up tough deposits.
• Always perform a compatibility test on a small area before full application.

GOOD PRACTICE

Under Good Practice Protocol this product as stated provides general biostatis using internationally recognised antibacterial agents with a recommended minimum contact time of 10 minutes. Undiluted product concentration provides 1000PPM QAC.

Use neat.  Do not dilute.  Spray or squirt directly onto sufaces.  Leave for 5-10 minutes.  Rinse with fresh water.  A non-scratching cleaning pad may be used to assist ARCTED break up extra heavy soiling.  Always test ARCTEC on a small area to be cleaned first, to ensure compatibility.